4 2 IDS404 INSTALLER MANUAL NO. 700-277-02A ISSUED SEPT 2004 VER 1.02
IDS404 INSTALLER MANUAL
indicating an open by user 1.
NOTE:
If the system is disarmed by means of a key or remote using an arm/
disarm zone the system will report open by user 13.
031NOITACOLedocgnitroperyatS&esolC
The stay code will be reported when the system is armed in the stay
mode indicated by an illuminated ARMED but extinguished AWAY
LED
on the keypad. The digit programmed into this location is the first
digit of the reporting code. The second digit will automatically be
added and will be the number which corresponds to the user code
used to arm the system (See Users Manual).
See the EXAMPLE and NOTE for location 128.
231-131SNOITACOLedocgnitropertset-otuA
This code is the test reporting code and will be reported at regular
intervals as programmed into location 167. Reporting of this code is
recommended as it provides verification that the system is functioning
correctly.
431-331SNOITACOLedocgnitropereriFdapyeK
This code will be reported if the fire button [F] on the keypad is held
down until the keypad beeps (approximately 2 seconds).
631-531SNOITACOLedocgnitroperlacideMdapyeK
This code will be reported if the medical button [M] on the keypad is
held down until the keypad beeps (approximately 2 seconds).
731NOITACOLedocgnitroperenoZdessapyB
A zone bypass code will be reported if the panel is armed with a
bypassed zone. The zone number will be appended to this reporting
code to provide the 2 digit reporting code.
831NOITACOL devreseR
To Next Page
Loading...