INNOCN 29C1F-D - Installation

service@innocn.com
3
Français
Installation de la base
Installation
Remarque : Lorsque vous redressez le moniteur, ne sortez pas le moniteur de son sac en
mousse et ne pincez pas l’écran à cristaux liquides avec les mains afin d’éviter
de l’endommager.
2. Take off the top cover of Polylong, take out the body bag and put the body back into the original
bottom cover of Baolong.
Lower foam cover
Monitor
3. Take out the bracket and base, and tighten the manual screws on the base after assembly.
Stand
Base
hand screw
1. Open the carton package, take out the upper and lower foam covers and put them flat on the table top.
Lower foam cover
Upper foam cover
5. Maintenez simplement le pied à la main pour mettre le moniteur debout.
N’appuyez pas sur l’écran LCD.
Quick release button
4. Insert the hook at the front end of the shaft of the lifting bracket into the bayonet of the rear shell
obliquely, and gently press the tail end perpendicular to the surface of the rear shell, so that the
lock of the lifting bracket can be buckled on the quick release button of the rear shell, and the quick
release button has a return. The snap action indicates that the tail end has also been snapped into
place.