Innotech inVoca - Page 7

inVoca User Guide - Page 13
Train inVoca To Select The Cable Box
You Do This inVoca Response
Press [Train] "Say a word." LED will light green.
Say "Cable" "Repeat"
Say "Cable" again. "Press a button"
Press [CBL/SAT] "Button accepted. Press another button"
Press [Train] "Button assigned"
To program inVoca to select your TV, follow the above procedure,
but use the [TV] button instead of the [CBL/SAT] button, and use the
command "TV."
Train inVoca To Make The Volume Louder
You Do This inVoca Response
Press [Train] "Say a word." LED will light green.
Say "Louder." "Repeat"
Say "Louder" again. "Press a button"
Press [V+] "Button accepted. Press another button"
Press [Train] "Button assigned"
Train inVoca to Make The Volume Softer
You Do This inVoca Response
Press [Train] Say a word. LED will light green.
Say "Softer." "Repeat."
Say "Softer"again. "Press a button"
Press [V-] "Button accepted. Press another button"
Press [Train] "Button assigned"
L To make inVoca get louder or softer rapidly without having to
repeat the commands Louder and Softer, see Fast Volume™
(page 19) 7
inVoca User Guide - Page 14
Train inVoca to Scan Channels (see page 20 for Scan operation.)
You Do This inVoca Response
Press [Train] inVoca will say, "Say a word." The LED
will light green.
Say "Scan." inVoca will say "Repeat."
Say "Scan"again. If the two words match, inVoca will say
"Press a button."
Press [SCAN] inVoca will respond with, "Button
accepted. Press another button."
Press [Train] inVoca will say, "Button assigned."
Using this procedure, you can set up both simple or complex
sequences. For example, let us now set up a simple macro to turn the
TV to channel 33 to watch Nickelodeon (you will need to substitute
the correct channel number for your location):
Train inVoca to Tune to a Specific Channel
You Do This inVoca Response
Press [Train] inVoca will say, "Say a word." The LED
will light green.
Say "Nickelodeon" "Repeat"
repeat "Nickelodeon" "Press a button."
Press [3] "Button accepted. Press another button"
Press [3] "Button accepted. Press another button"
Press [Train] "Macro assigned."
You'll never have to remember what the channel number for
Nickelodeon is again! Using the same sequence, you may train
inVoca to respond to your other favorite channel choices. Remember,
you don't have to set up all of your channels — you can still change
channels with "Next Channel," "Previous Channel," and "Scan."
Just set up your favorite channels.