APPROVED
MEK REV NO: C
TITLE
MODEL NO
DATE
DRAWN
M2K03 USER INSTRUCTIONS
MICRO 2000 CONTROLLER
25/07/07
USER INSTRUCTIONS
M2K03
SETTING THE CLOCK ‘TIME, DATE AND YEAR’
The first time the controller is powered up, the display will read SET CLOC.
To set the clock, follow the instructions below.
STEP 1
Press and hold the button until the display goes blank. Press the and buttons to
select clock CLOC edit mode and press the button.
STEP 2
Use the and buttons to adjust your time settings and save it by pressing the button .
STEP 3
Use the and buttons to adjust the DAY/MONTH and save it by pressing button.
BUTTON FUNCTIONS
= ENTER is used to save settings and to enter a new parameter.
= BACK allows you to scroll back to the previous setting or parameter.
= DELETE is used to delete a Time Schedule.
= COPY is used to copy the previous Time.
STEP 4
Use the and buttons to adjust the YEAR and save it by pressing button.
STEP 5
To save and exit the ‘CLOC’ mode, press and hold the button until the display goes blank.
Note: If a mistake is made you can press the button to return to the previous setting.
To Next Page
Need help?
General
