Innotech MAXIM III - User Manual

MAXIM Series Controllers
INSTALLATION INSTRUCTIONS

Summary

Chapter 3 - Electrical Installation

3-2 Electrical Installation Practices

3-3.1 MAXIM I, II, III, and 1010 Controllers Wiring

Details wiring information for MAXIM Series I, II, III, and 1010 controllers, including power and I/O.

3-3.2 MiniMAX Controllers Wiring

Provides wiring information for the MiniMAX MM01 and MM02 controllers, including power and I/O.

3-3.3 VAVMax and MicroMAX Controllers Wiring

Details wiring information for VAVMax and MicroMAX controllers, including power and I/O.

3-3.4 IG01 Sub System Gateway Wiring

Provides wiring information for the IG01 Sub System Gateway, including power and I/O.

Chapter 5 - Commissioning

5-2 Mechanical Inspection

5-2.2 Electrical Inspection

Verifies electrical connections, power, earthing, wiring clarity, and absence of damage.

Appendix A - Using the CT01 Commissioning Tool

A-2 Connecting the CT01 to Subsystem Network

A-3 Logging onto the Controller

A-4 VAVMax Settings Configuration

Explains how to calibrate parameters on a VAVMax controller using the CT01.

A-5 Commissioning Procedures

Innotech MAXIM III Specifications

General

Brand	Innotech
Model	MAXIM III
Category	Controller
Language	English