20
What You
See and Hear
Possible Causes What To Do
“Breath
Alarm” and
“Flow Alarm”
lights are on
solid
Device is
sounding a
continuous
tone
The device has detected a fault
preventing it from operating
correctly.
1. Make sure the Bypass Valve is
closed (fully pushed in)
2. Turn the device OFF, and then
back ON.
3. If problem persists, stop using
the system and contact Customer
Support at 888-599-1105.
4. If needed, open the bypass by
pulling out the stem (page 14).
The TAV® will deliver a constant
ow at 2 LPM.
To Next Page
Loading...
