14
Using the Bypass Valve
Follow the steps below to use the bypass
valve.
1. Pull the bypass valve (arrow)
2. A green colored band will be visible
when the valve is open.
Note: Use the bypass valve only if the device
does not operate. Standard TAV® modes will
not work properly when the bypass valve is
opened.
If your TAV® device stops working (e.g.,
because of a dead battery), the Bypass Valve
may be used to deliver a constant ow of
oxygen at about 2 lpm. Do not use the
Bypass Valve for normal operation.
To Next Page
Loading...
