Inovance IMC30-6G Series - 3.6 Description and Wiring of General Input Interface

- 24 -
3 Hardware Connection
2 ） When driving optocoupler load
"YJTDPOUSPMNPEVMF

&9 @7
&9 0
-PBE

&9 @7
/"
/PFYUFSOBM
QPXFSTVQQMZ
&YUFSOBM7%$
&YUFSOBM7
3 Wiring of low-speed position comparison output interface
The low-speed position comparison output channels 0 to 4 and the general outputs
EX-O0 to EXO3 are reused, as described in the following table.
Pin
General
Output
Interface
Low-Speed Position Comparison
Output Interface
Description
0 EX-O0
Low-speed position comparison
output channel 0
Up to 10 kHz at position
comparison output
1 EX-O1
Low-speed position comparison
output channel 1
Up to 10 kHz at position
comparison output
2 EX-O2
Low-speed position comparison
output channel 2
Up to 10 kHz at position
comparison output
3 EX-O3
Low-speed position comparison
output channel 3
Up to 10 kHz at position
comparison output