EasyManua.ls Logo

Inovance IMC30-6G Series - Page 4

Inovance IMC30-6G Series
37 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 3 -
Safety Instructions
WARNING
Do not install the equipment if you 󶍾nd damage, rust, or indications of use on
the equipment or accessories.
Do not install the equipment if you 󶍾nd water seepage, component missing or
damage upon unpacking.
Do not install the equipment if you 󶍾nd the packing list does not conform to
the equipment you received.
Storage and Transportation
CAUTION
Store and transport this equipment based on the storage and transportation
requirements for humidity and temperature.
Avoid transporting the equipment in environments such as water splashing,
rain, direct sunlight, strong electric 󶍾eld, strong magnetic 󶍾eld, and strong
vibration.
Avoid storing this equipment for more than three months. Long-term storage
requires stricter protection and necessary inspections.
Pack the equipment strictly before transportation. Use a sealed box for long-
distance transportation.
Never transport this equipment with other equipment or materials that may
harm or have negative impacts on this equipment.
WARNING
Use professional loading and unloading equipment to carry large-scale or
heavy equipment.
When carrying this equipment with bare hands, hold the equipment casing
󶍾rmly with care to prevent parts falling. Failure to comply may result in
personal injuries.
Handle the equipment with care during transportation and mind your step to
prevent personal injuries or equipment damage.
Never stand or stay below the equipment when the equipment is lifted by
hoisting equipment.
Installation
WARNING
Thoroughly read the safety instructions and user guide before installation.
Do not modify this equipment.
Do not rotate the equipment components or loosen 󶍾xed bolts (especially
those marked in red) on equipment components.
Do not install this equipment in places with strong electric or magnetic 󶍾elds.
When this equipment is installed in a cabinet or 󶍾nal equipment, protection
measures such as a 󶍾reproof enclosure, electrical enclosure, or mechanical
enclosure must be provided. The IP rating must meet IEC standards and local
laws and regulations.

Related product manuals