5 Parameter Table
- 34 -
Para. No. Para. Name Setting Range Default Comms. Address
F4-34
Setting selection when AI less
than min. input
Setting selection when
external operating panel
potentiometer less than
min. input
0: Corresponding
percentage of min. input
1: 0.0%
Setting selection when AI
less than min. input
0: Corresponding
percentage of min. input
1: 0.0%
00 0xF422/0x0422
F4-35 DI1 delay 0.0 to 3600.0s 0.0s 0xF423/0x0423
F4-36 DI2 delay 0.0 to 3600.0s 0.0s 0xF424/0x0424
F4-37 DI3 delay 0.0 to 3600.0s 0.0s 0xF425/0x0425
F4-38 DI active mode selection1
DI2 active mode:
0: High level active
1: Low level active
DI1 active mode:
0: High level active
1: Low level active
DI3 active mode:
0: High level active
1: Low level active
DI4 active mode:
0: High level active
1: Low level active
00000 0xF426/0x0426
F4-41 DIO terminal type
0: DI/Pulse input
1: DO
0 0xF429/0x0429
To Next Page
Loading...
