Inovance MD290T45G/55P User Manual

6. Description of Parameters
- 181 -
6
Value Function Description
50 Clear running time
this time
When terminal set for this function becomes on, current running time of
the AC drive is cleared. This function must be supported by F8-42 and F8-
53.
51 Two-wire control/
Three-wire control
This function enables the AC drive to switch over between two-wire
control and three-wire control. If F4-11 is set to two-wire control mode 1,
the AC drive switches over to three-wire control mode 1 when terminal set
for this function becomes on.
52 Reverse running
prohibited
When terminal set for this function becomes on, reverse running of the
AC drive is prohibited. It is the same as function of F8-13.
53 to 59 Reserved
-
Function Code Parameter Name Setting Range Default
F4-35
DI1 delay
0.0s to 3600.0s
0.0s
F4-36
DI2 delay
0.0s to 3600.0s
0.0s
F4-37
DI3 delay
0.0s to 3600.0s
0.0s
When state of DI terminals changes, these three function parameters set delay time of the
change. Now the drive supports delay function on DI1, DI2 and DI3 only.
Function Code Parameter Name Setting Range Default
F4-38
DI active mode
selection 1
DI2 active mode:
0: High level active
1: Low level active
DI1 active mode:
0: High level active
1: Low level active
DI3 active mode:
0: High level active
1: Low level active
DI5 active mode:
0: High level active
1: Low level active
DI4 active mode:
0: High level active
1: Low level active
00000

Inovance MD290T45G/55P Specifications

General

Brand	Inovance
Model	MD290T45G/55P
Category	DC Drives
Language	English