Inovance MD290T45G/55P - Appendix A Standards Compliance

Appendix
- 286 -
12
Appendix A Standards Compliance
A.1 CE
A.1.1 CE Mark
CE mark indicates compliance with European safety and environmental regulations. It is required
for engaging in business and commerce in Europe.
European standards include the Machinery Directive for machine manufacturers, the Low
Voltage Directive for electronics manufacturers, and EMC guidelines for controlling noise.
This drive is marked with CE mark based on the following EMC guidelines and the Low Voltage
Directive.
Ɣ
2014/35/EU: Low Voltage Directive
Ɣ
2014/30/EU: Electromagnetic compatibility
0DFKLQHVDQGGHYLFHVXVHGLQFRPELQDWLRQZLWKWKLVGULYHPXVWDOVREH&(FHUWL¿HGDQG
marked. The integrator who integrates the drive with the CE mark in into other devices has
the responsibility of ensuring compliance with CE standards and verifying that conditions meet
European standards.
A.1.2 CE Low Voltage Directive Compliance
This drive has been tested according to IEC 61800-5-1: 2007, and it complies with the Low
Voltage Directive completely.
To enable machines and devices integrating this drive to comply with the Low Voltage Directive,
be sure to meet the following conditions:
Ƶ
Mounting Location
Mount the AC drive in places with Pollution Degree 2 and overvoltage category 3 in
accordance with IEC60664.