Inovance MD800 Series - Page 53

Commissioning and Trial Run
‑52‑
Parameter
No.
Communication
Address
Parameter Name Setting Range Default Unit Property
FD‑95 64863 Station number of
device connected to
expansion card slot 3
0–65535 0 ‑ Modification
prohibited
FD‑96 64864 Station number of
device connected to
reserved slot 4
0–65535 0 ‑ Modification
prohibited
FD‑97 64865 Station number of
device connected to
reserved slot 5
0–65535 0 ‑ Modification
prohibited
FD‑98 64866 Station number of
device connected to
reserved slot 6
0–65535 0 ‑ Modification
prohibited
FD‑99 64867 Station number of
device connected to
reserved slot 7
0–65535 0 ‑ Modification
prohibited
FP‑00 7936 User password 0–65535 0 ‑ Modifiable
in any states
FP‑01 7937 Parameter
initialization
0: No operation
1: Restore factory settings
2: Clear records
4: Back up current user
parameters
501: Restore user backup
parameters
1 ‑ Modifiable
in any states
FP‑03 7939 Monitoring parameter
display setting
Bit00: Bus voltage
Bit01: Heatsink
temperature
Bit02: Ambient
temperature
Bit04: Usr line voltage
Bit05: Ust line voltage
Bit06: Utr line voltage
Bit06: Three‑phase
unbalance factor
251 ‑ Modifiable
in any states
FP‑05 7941 I/O parameter restore 0: Invalid
1: Extend IO1
2: Extend IO2
3: Extend IO3
255: Extend all IOs
0 ‑ Modifiable
in any states
FP‑06 7942 Local parameter copy
mode
1: Copy all parameters
2: Copy non‑motor
parameters
1 ‑ Modifiable
in any states