EasyManua.ls Logo

Inovance MD800 Series - Page 95

Inovance MD800 Series
145 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Commissioning and Trial Run
94
Parameter
No.
Communication
Address
Parameter Name Setting Range Default Unit Property
F8‑24 63512 Frequency detection
value 2 (FDT2)
0.00655.35 Hz 50.00 Hz Modifiable
in any states
F8‑25 63513 Frequency detection
hysteresis 2 (FDT2)
0.00655.35 Hz 2.50 Hz Modifiable
in any states
F8‑26 63514 Frequency detection
frequency
0.00655.35 Hz 2.50 Hz Modifiable
in any states
F8‑27 63515 Detection value 1 of
any frequency
reached
0.00655.35 Hz 50.00 Hz Modifiable
in any states
F8‑28 63516 Detection frequency 1
of any frequency
reached
0.00 to F8‑28 2.50 Hz Modifiable
in any states
F8‑29 63517 Detection mode of
any frequency reach 1
0: Detected at any time
1: Not detected during
acceleration/deceleration
0 Modifiable
only at stop
F8‑30 63518 Detection value 2 of
any frequency
reached
0.00655.35 Hz 50.00 Hz Modifiable
in any states
F8‑31 63519 Detection frequency 2
of any frequency
reached
0.00 to F8‑28 2.50 Hz Modifiable
in any states
F8‑32 63520 Detection mode of
any frequency reach 2
0: Detected at any time
1: Not detected during
acceleration/deceleration
0 Modifiable
only at stop
F8‑35 63523 Switchover frequency
of acceleration time 1
and acceleration time
2
0.00655.35 Hz 0.00 Hz Modifiable
in any states
F8‑36 63524 Switchover frequency
of deceleration time 1
and deceleration time
2
0.00655.35 Hz 0.00 Hz Modifiable
in any states
F8‑37 63525 Set highest priority to
JOG function
0: Disabled
1: Enabled
0 Modifiable
only at stop
F8‑38 63526 Zero current detection
level
0.0% to 300.0% 5.0 % Modifiable
in any states
F8‑39 63527 Zero current detection
delay
0.01s to 600.00s 0.10 s Modifiable
in any states
F8‑40 63528 Output overcurrent
threshold
0.0% to 300.0% 200.0 % Modifiable
in any states
F8‑41 63529 Output overcurrent
detection delay
0.00s to 600.00s 0.00 s Modifiable
in any states
F8‑42 63530 Detection value 1 of
any current reached
0.0% to 300.0% 100.0 % Modifiable
in any states
F8‑43 63531 Detection width 1 of
any current reached
0.0% to 300.0% 0.0 % Modifiable
in any states

Other manuals for Inovance MD800 Series

Related product manuals