Electrical Installation
‑38‑
No.
Description
Yes
3
The main circuit cables (U, V, W) of the motor are connected to
the U/V/W terminals of the drive correctly.
□
4
No short circuit exists in the power input terminals (L1, L2, L3, R,
S, T) or main circuit output terminals (U, V, W) of the servo drive.
□
5
The stress suffered by the cable is within the specified range.
□
6
The servo drive and servo motor are grounded properly.
□
7
All the wiring terminals are insulated properly.
□
To Next Page
Loading...
