www.insigniaproducts.com
14
Setting up your portable air conditioner
Remove and store (optional) packing materials for reuse. Remove any shipping tape before using your air conditioner.
Remove tape residue with liquid dish soap and a damp cloth. Do not use sharp tools, alcohol, thinners, or abrasive cleaners
to remove adhesive, which could damage the finish.
Placing your air conditioner
• Place the unit on a flat, dry area near a window, so you can use the exhaust hose assembly to connect your air
conditioner to the window installation kit in order to vent the exhaust air outside.
• To maintain good air circulation and optimum machine performance, leave a 50 cm (20 in.) space around it.
Installing the exhaust hose
1 Place the exhaust hose vertically on the floor, pull out the upper end by 10 cm (4 in.), then rotate the exhaust hose
connector counter-clockwise onto the exhaust hose until it is fully tightened.
2 Rotate the exhaust adapter onto the other end of the exhaust hose the same way as step 1.
CAUTIONS:
• Do not remain in the direct airflow from your air conditioner for extended periods.
• When used at the same time as stoves, fireplaces, or other combustion/heating devices, make sure that there is sufficient flow of fresh air
into the room. Do not use in tightly closed spaces with these types of devices.
• This air conditioner is intended for household use as a consumer comfort appliance. Do not use it as a precision climate control system
for the purpose of cooling precision equipment, food, pets, plants, artwork, and so on. Such items could be damaged.
• Do not bend the exhaust hose downward when the window installation kit is not being used. Doing so may cause inferior performance
or failure of your air conditioner.
50 cm (20 in.)
50 cm (20 in.)
Exhaust hose
connector
Exhaust hose
Exhaust hose
Exhaust hose
connector
Exhaust adapter
To Next Page
Loading...
Need help?
General
