www.insigniaproducts.com
8
Electrical Safety
Integrated circuit breaker
For additional safety, the power cord on this air conditioner features an integrated circuit breaker. You can test and reset
the circuit breaker using the buttons provided on the plug case.
The circuit breaker should be tested periodically by pressing the TEST button then the RESET button. If the TEST button
does not cause the circuit breaker to trip, or if the RESET button will not stay engaged, unplug your air conditioner
immediately and contact an Insignia technician.
Preferred grounding method
Temporary grounding
Due to potential safety hazards, we strongly discourage the use of an adapter plug. If an adapter plug must be used
for a temporary connection, use only a UL-listed adapter with a minimum capacity of 120V~60Hz, 15A, and 1800W. Make
sure that the large slot of the adapter is aligned with the large slot in the outlet.
To prevent damage to the adapter’s ground terminal, hold the adapter in place while plugging or unplugging your air
conditioner.
Attaching the adapter ground terminal to the wall receptacle cover screw does not ground the appliance unless the cover
screw is metal and not insulated and the wall receptacle is grounded through the house wiring.
Frequent connection and disconnection can damage the ground terminal on the adapter. Never use a broken or damaged
adapter.
Make sure that a
proper ground
exists before use.
Make sure that a
proper ground
exists before use.
To Next Page
Loading...
Need help?
General
