11
3.3 Cu. Ft. 12 Volt Compact Refrigerator
www.insigniaproducts.com
Reversing the door position
You need the following tools to reverse the door:
1 Unplug your refrigerator, then remove all contents.
2 Adjust the leveling feet to their highest positions.
3 Remove the screw holding the top hinge cover to the top of your refrigerator,
then remove the cover.
4 Remove the screws holding the top hinge to your refrigerator, then remove
the hinge.
5 Remove the screw hole covers from the left side of your refrigerator.
6 Pull the door upward and remove it from your refrigerator.
CAUTIONS:
• To avoid serious injury or death from electrical shock, disconnect main DC power
before you reverse the door.
• To remove the door, you have to tilt your refrigerator backwards. To avoid
personal injury and property damage, get another person to tilt your refrigerator
while you reverse the door. You can also lean your refrigerator against something
solid, like a chair, just below the top panel.
• DO NOT lay your refrigerator flat because you may damage the coolant system.
10 mm nut driver Phillips screwdriver
To Next Page
Loading...
Need help?
General
