13
3.3 Cu. Ft. 12 Volt Compact Refrigerator
www.insigniaproducts.com
11 Align the hole in the bottom left of the refrigerator door with the bottom
hinge pin, then install the door on the hinge pin.
12 Place the top hinge pin into the top of the refrigerator door, then install the
top hinge on the top left of your refrigerator with the screws you removed
previously.
13 Check the fit and alignment (vertical and horizontal) of the door to make sure
that the door freely opens and closes, then tighten the screws holding the top
hinge.
14 Install the screw covers you removed previously into the holes in the top right
of your refrigerator.
15 Adjust the leveling feet to level your refrigerator.
Leveling your refrigerator
• Your refrigerator must be level in order to function correctly. If your
refrigerator isn’t leveled during installation, the door may not close or seal
correctly and cause cooling, frost, or moisture problems.
• To level your refrigerator, turn the leveling foot clockwise to raise a side of your
refrigerator or turn it counter-clockwise to lower a side.
Note: Having someone push against the top of your refrigerator helps to take some
weight off the leveling foot and makes it easier to adjust.
To Next Page
Loading...
Need help?
General
