14
NS-CF12V33BK1
www.insigniaproducts.com
Setting the thermostat
1 The first time you turn your refrigerator on, adjust the thermostat to 7 and let
your refrigerator cool at least 2 hours before putting foods inside. This makes
sure that the cabinet is thoroughly chilled before food is put in.
2 After it is fully cooled, test the temperature and adjust towards 1 to make it
less cool or towards 7 to make it cooler, as needed. The 4 setting should be
appropriate for home or office refrigerator use.
3 To turn off your refrigerator, set the thermostat to 0.
Note: Your refrigerator’s temperature ranges from 32° to 46.4° F (0° to 8° C).
Notes:
• Turning the thermostat to 0 stops the cooling cycle but doesn’t shut off the power
to your refrigerator.
• If your refrigerator is unplugged or loses power, you must wait three to five
minutes before restarting it. If you try to restart it before this time delay, your
refrigerator won’t start.
• Large amounts of food lower the cooling efficiency of your refrigerator.
• When changing the thermostat setting, adjust it one increment at a time. Wait
several hours for the temperature to stabilize between adjustments.
To Next Page
Loading...
Need help?
General
