Insignia NS-DSC10SL User Manual

6
NS-DSC10SL Insignia 10 Megapixel Camera
www.insigniaproducts.com
Setting up your camera
Attaching the wrist strap
To attach the wrist strap:
1 Insert the short loop on the strap into the strap
ring.
2 Thread the larger loop of the strap though the
short loop, then pull the strap tight.
Installing the battery
To install the battery:
1 Make sure that the power is turned off.
2 Slide the lock to the unlocked position, then
open the battery/SD/SDHC card compartment
on the bottom of your camera.
3 Insert the battery into the battery
compartment. Make sure the + and – symbols
on the battery align with the + and – symbols in
the battery compartment.
4 Close the compartment cover, then slide the
lock into the locked position.
Charging the battery
To charge the battery:
1 Align the battery’s + and – symbols with the +
and – symbols on the supplied battery charger,
then slide the battery into place until it locks.
2 Plug the battery charger into an AC outlet. The
LED on the battery charger lights red.
3 When the battery has completed charging, the
LED will light green.
4 Unplug the battery charger from the AC outlet,
then remove the battery from the charger and
insert it in your camera according to the
instructions on page 6.
Inserting or removing an SD or SDHC memory
card
To insert an SD or SDHC memory card:
1 Make sure that the power is turned off.
2 Slide the lock to the unlocked position, then
open the battery/SD/SDHC card compartment
on the bottom of your camera.
Note
The battery cannot be charged by connecting your
camera to a computer.

Insignia NS-DSC10SL Specifications

General

Brand	Insignia
Model	NS-DSC10SL
Category	Digital Camera
Language	English