Insignia NS-DSC10SL User Manual

21
Insignia 10 Megapixel Camera
www.insigniaproducts.com
File naming
File names begin with “DSCI,” and are followed by a
four-digit number that increases sequentially. File
numbering starts from 0001 when a new folder is
created. If the highest folder number is 999 and the
highest file number exceeds 9999, the camera
displays the warning message “Folder cannot be
created.” If this occurs, delete unwanted photos and
videos, or replace the memory card.
Troubleshooting
Specifications
Specification subject to change without notice.
Problem Solution
Camera does not turn on
• Hold POWER down for at least a full second.
• Recharge the battery.
• Make sure that the battery is installed.
Camera turns off
automatically
•Press the POWER button to turn your camera
back on. If the camera will not turn back on,
check the battery to make sure it is correctly
installed and fully charged.
LCD turns blank
• Press any button except POWER to turn on
the LCD.
• Make sure that camera USB port is not
connected to a computer.
Empty battery icon
appears on the LCD, then
the camera turns off
• Charge the battery.
LCD does not display an
image
• The file format on the memory card may not
be supported.
LCD displays “Not
available for this file”
• The function is only available for certain file
formats.
• File format is not supported.
LCD displays “Memory
full”
• The internal memory or memory card (if
inserted) is full. Either delete files from the
internal memory or memory card, or replace
the card with another card that has available
memory.
LCD displays “Card
locked”
• The card is protected. Remove the card, then
slide the write-protect switch to the
unlocked position.
LCD displays “Format
error”
• The card is protected. Remove the card, then
slide the write-protect switch to the
unlocked position.
LCD displays “Copy
error”
• The card is protected. Remove the card, then
slide the write-protect switch to the
unlocked position.
• The memory card is full. Either delete files
from the card or replace the card with
another card with available memory.
The lens did not retract
• Do not force the lens to retract. The
battery may be an incorrect type or the
battery level may be too low to retract the
lens. Change the battery or recharge the
battery before using your camera.
Sensor 10 megapixels, Type: 1/2.3
Lens Focal length: F=6.2 m ~ 18.6 m (37.5 mm ~ 112.5mm)
3X optical zoom, 5X digital zoom
LCD monitor 2.7" color
Focusing range Normal wide: 12in (30.5cm) ~ infinity
Normal tele: 24in ~ infinity (60cm ~ infinity)
Macro wide: 2.5in ~ Infinity (6cm ~ infinity)
Macro tele: 12in ~ 60in (30cm ~ 150cm)
Aperture F=3.0 (W)-5.6(T)
Shutter Type: Mechanical and electronic
Speed: 8 - 1/2,000 second
File format Still image: EXIF 2.2 compatible JPEG
Video: AVI (MJPEG)
Resolution (still image) 10 Megapixels (3648 × 2736)
8 Megapixels (3264 × 2448)
5 Megapixels (2592 × 1944)
3 Megapixels (2048 × 1536)
Wide (3648 × 2048)
Sensitivity Auto: 50, 100, 200, 400, 800, 1600, 3200
Low/Med/High: 100/400/800
Color balance Auto, Sunny, Cloudy, Tungsten, Fluorescent
Self-timer 10 seconds, off
Flash Auto, Red-eye Reduction, Forces On, Slow Sync, Off
Storage Internal memory: 32 MB flash memory
(Approximately 20 MB available storage capacity)
External memory: SD card (up to 4 GB) SDHC (up to 32 GB)
OSD languages English, French, Spanish
Interface USB
Battery Li-Ion type NP45 3.7V, 700mAh
Operating temperature 32°F ~ 104°F (0°C ~ 40°C)
Operating humidity 0% ~ 90%

Insignia NS-DSC10SL Specifications

General

Brand	Insignia
Model	NS-DSC10SL
Category	Digital Camera
Language	English