9
Insignia 10 Megapixel Camera
www.insigniaproducts.com
4 Press . A confirmation message appears
on screen.
5 Press or to highlight Ye s , then press SET.
The next image or video appears on the LCD
monitor.
6 Repeat Step 3 through Step 5 to delete
additional images or videos.
7 To close the delete function, select Cancel, then
press SET.
Turning Simple mode on or off
When you turn on your camera for the first time, it
will be in Simple mode. Simple mode hides
advanced settings and less frequently used menu
options, while still letting you take high quality
images and videos.
To turn Simple mode on or off:
1 Slide the (mode slider) to (Photo
mode) or (Video mode).
2 Press . The on-screen menu opens.
3 Press or to highlight . The setup menu
opens.
4 Press or to highlight Simple Mode, then
press or SET to enter the sub-menu.
5 Press or to highlight On or Off, then press
SET or MENU.
Changing the LCD monitor information
display
You can change the type of information displayed
on the LCD screen by pressing the DISP button on
the navigation control.
Photo mode
Video mode
Playback mode
Using zoom when recording
Your camera features 3× optical zoom and 5×
digital zoom.
To use zoom when recording:
• Press the right side of the Zoom control to zoom
in. Press the left side of the Zoom control to zoom
out. The zoom indicator appears on the LCD
monitor. The section of the zoom indicator on the
right side indicates that the digital zoom is being
used.
M
Note
You cannot change the display when recording or
playing back videos.
Note
If turned on, the Face Tracking, Flash, Self-timer,
Macro, and Stabilizer icons are displayed even when
the OSD is turned off.
Note
Using the digital zoom will reduce the quality of your
images. This is normal.
OSD on
Full OSD on OSD off
Full OSD on
OSD off
OSD on Full OSD on
OSD off
To Next Page
Loading...
Need help?
General
