32″LCD TV Best Buy NS-LCD32-09
10
number buttons to directly select a channel (for example, if you want channel 83, press 8, then press 3).Or Press the
RECALL button to go to the last viewed channel.
Selecting a digital sub-channel
Most digital TV channels have more than one channel. The main channel carries the signal for the main TV program.
The sub-channels carry signals for additional or alternate programming, such as a radio or news broadcast.
For example, if the main channel number is 8, the sub-channel number might be 8-1, 8-2, or 8-3.
To select a sub-channel:
1 Press the number buttons for the main channel (for example 8).
2 Press the – button, and then press the sub-channel button (for example 1).
To adjust the volume:
• Press the VOL – or VOL + button to decrease or increase the volume.
• Press the MUTE button to turn off the sound. Press the MUTE button again to turn the sound back on.
To display status information:
• Press the DISPLAY button. Your TV displays status information, such as the channel number or signal source.
To check the DTV signal strength:
1 Press the MENU button. The Main OSD (On-Screen Display) menu opens with Setup highlighted.
2 Press the > button to enter the sub-menu, then ▽or △ to highlight DTV Signal. The DTV Signal meter opens.
3 Press MENU or EXIT to close the menu.
To add a label to a channel:
1 Press the MENU button. The Main OSD (On-Screen Display) menu opens with Setup highlighted.
2 Press the > button to enter the sub-menu, then ▽or △ to highlight Channel Labels. The Channel Label menu
opens.
3 Press the < or > button to move the cursor to the channel field or label field, and then press the ▽or △ button to
select
4 Press < or > to move the cursor to the label field, then press ▽or △to select the character.
5 Press the ENTER key to return to the previous menu.
Freezing the picture
You can freeze (still) the screen image.
To freeze or unfreeze the picture:
• Press the FREEZE button.
To Next Page
Loading...
