www.insigniaproducts.com
10
Reversing the freezer door
You will need the following tools to reverse the freezer door:
1 Make sure that your freezer is unplugged and empty.
2 Tilt your freezer back and rest the front base on something solid so that it won’t fall forward or back during the door
reversing process. It may help to have another person to assist you.
3 Remove the top hinge cover from the top right side of your freezer. (Tool needed: B)
4 Remove the screws that secure the top right hinge to the door, then remove the hinge. (Tool needed: C)
5 Remove the top left hinge cover. (Tool needed: B)
CAUTION: If you lay your freezer on its back or side for any length of time, wait for six hours after you stand it up again before you plug
it in. Otherwise, you may damage internal components.
CAUTION: Make sure that your freezer is stable when you tip it back.
Tool A: Phillips head screwdriver
Tool D: Adjustable wrench
Tool C: T-shaped socket wrench (8mm)
Tool B: Flat head screwdriver
To Next Page
Loading...
Need help?
General