Insta360 Ace Pro 2 - Page 6

Insta360 Ace Pro 2 User Manual
3
Wind Guard
Get crystal-clear audio
in any situation with the
innovative Wind Guard.
Professional acoustic
foam combined with a
metal mesh design
reduces wind noise and
enhances clarity, ready
to snap on and off as
needed.
It is recommended for
high-speed activities
such as motorcycling
and mountain biking.
How to Use:
The Wind Guard is installed on
Insta360 Ace Pro 2 by default. It
can be installed or removed as
needed.
Installation:
1. Align the Wind Guard with the
diagonal mark on the front of the
camera and hold it firmly against
the camera.
2. Slide the Wind Guard to the left
until it makes a clicking sound.
Ensure the red indication mark is
fully covered.
Removal:
1. Slide the Wind Guard to the
right to expose the red indication
mark, then remove it.
Notes:
1. Use and store the Wind Guard
in dry environments, as
dampness can affect sound
quality and performance.
2. To use the camera underwater,
remove the Wind Guard and
install the included Mic Cap.
3. Attaching and removing the
Wind Guard will not affect the
waterproofing of the camera
itself.