Ace Pro User Manual
Connecting Multiple Cameras
Swipe down from the top of the remote's watch dial to enter the connecting interface and tap the
camera button.The remote will be ready to pair. Enter the Bluetooth Remote feature on your
camera and connect to the remote. Repeat the process as needed.
Notes:
• The remote can control up to four cameras at a time. Each camera only recognizes one
remote at a time.
• The remote will only show the number of connected cameras and no other camera
information.
Wake up a Camera
You can use the remote to wake up your camera. After connecting to the camera for the first time,
swipe down on the remote touchscreen to enter the connection interface, and choose one of the
following two ways to wake up the camera:
• Connect: Wake up the last connected camera. The camera will automatically connect to the
remote once powered on.
• QuickCapture: Wake up the last connected camera. The camera will automatically connect to
the remote and enter QuickCapture.
Notes:
• Enable "Bluetooth Wakeup" on the camera to use this feature.
• The feature must be set on the camera before waking up, even if the remote is connected.
• To use QuickCapture, make sure it is enabled on your camera.
• Press the remote's Shutter Button once to enter QuickCapture. Long press the Shutter Button
to connect to the camera.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
