15
Smart Programme Settings
Cancel and Standby Mode
When the cooker is plugged in but not in operation, the display reads OFF to
indicate Standby mode.
Press Cancel to stop a Smart Programme at any time. The cooker returns to
Standby mode.
Turn Sound On/Off
Sound On: When in Standby, press and hold + button until display
indicates S On.
Sound Off: When in Standby, press and hold − button until display
indicates SOFF.
Note: Audible safety alerts (beeps) cannot be turned off.
Adjust Temperature Scale: Fahrenheit and Celsius
Press both − and + buttons simultaneously twice. Default temperature unit will
be displayed.
Press the + button repeatedly, to toggle between °F and °C.
Note: Temperature is only displayed within the Sous Vide Smart Programme.
Set a Delay Start Timer
Delay Start can be set to a minimum of 10 minutes or a maximum of 24 hours.
1. Select a Smart Programme and adjust the settings as you desire, then press
Delay Start.
Note: Once Delay Start has been selected, there is no way to return to the cooking
settings. To adjust Smart Programme settings, press Cancel and enter new selections.
2. When the hours eld ashes, use the − / + buttons to adjust the delay time.
E.g., 02:00 indicates that cooking will start after 2 hours.
3. Press Delay Start again to toggle to the minutes eld and follow the same
process as the previous step.
4. Delay Start begins automatically after 10 seconds and the timer counts down.
5. When Delay Start ends, the Smart Programme begins, and the display
indicates On. Delay Start is not available with the Sauté, Sous Vide or Yogurt
Smart Programmes.
To Next Page
Loading...
Need help?
General
