22
Overview of Pressure Control Features
Anti-Block Shield
The anti-block shield prevents food particles from coming up through the steam
release pipe, assisting with pressure regulation.
As an integral part of product safety, the anti-block shield must be installed before
use and cleaned frequently.
Remove the Anti-Block Shield
Grip the lid like a steering wheel and use your thumbs to press rmly against the
side of the anti-block shield (pressing towards the side of the lid and up) until it
pops off the prongs underneath.
Install the Anti-Block Shield
Place anti-block shield over prongs and press down until it snaps into position.
Do not attempt to operate the pressure cooker without the anti-block
shield installed.
Remove
Install
To Next Page
Loading...
Need help?
General
