Instant Pot IP-DUO80 - Advanced Cooking Modes and Functions; Canceling Programs and Auto Keep Warm Usage; Operating the Slow Cooker Function; Programming Delayed Cooking Start Times

16
 At any me, you can cancel the cooking program in progress and return to standby
mode by pressing the “Keep-Warm/Cancel” key.
7. When the pressure cooking cycle nishes, the cooker beeps and automacally goes into the
"Keep Warm" cycle, called Auto “Keep Warm” Cycle. The LED display shows an “L” on the
rst digit, such as "L0:02", to indicate the “Keep Warm” cycle and me duraon. The clock
counts up for 10 hours. If the 10 hour Auto “Keep Warm” cycle nishes, the cooker goes
into standby state.
 It is not recommended to leave cooked rice in “Keep-Warm” state for too long as it may
aect the texture of the rice.
8. To serve food, press “Keep-Warm/Cancel” to stop the keep-warm cycle and open the lid
according to the “Safe Lid Opening” secon of this manual.
 When opening the lid, the inner pot may appear to be stuck on the lid due to vacuum
eect caused by contracon of cooling air. Please turn the pressure release handle to
“Venng” to let in air to release the vacuum.

1. Follow steps in the "Cooking Preparaon" secon of this
manual. The pressure release handle should be at the
"Venng" posions. An oponal glass lid can also be used.
2. Connect the cooker to the power outlet. The LED display
shows “OFF” indicang that it’s in standby state.
3. Press the “Slow Cook” key.
4. Change cooking me between 0.5 and 20 hours by pressing
the "+" or "-" key.
5. Select the desired cooking mode with the “Adjust” key. By
pushing the "Adjust" key repeatedly, you can adjust the
cooking mode to “Normal”, “More” or “Less”, which
correspond to medium, high and low in a convenonal slow cooker.
6. Cooking starts automacally in 10 seconds aer the last key is pressed.
7. When the cooking nishes, the cooker beeps and goes into the Auto "Keep Warm" cycle for
10 hours.

Your Instant Pot® has a mer funcon to delay the start of cooking
for up to 24 hours. Timer funcon does not apply to the “Keep
Warm”, “Yogurt” and "Sauté" funcons. The following shows how
to program for delayed cooking.
1. Follow steps in the previous “Pressure Cooking” and “Slow
Cooking” secons to set a cooking program.
2. Within 10 seconds aer program selecon, press the “Timer”
key to set the hours and minutes to be delayed. Use “+” and “-
“ to set the delayed hours. Press the "Timer" key again to
change the minutes. The me is the delayed me before the
program starts. Please allow sucient cooking me and
cooling down me before serving.
3. 10 seconds aer the last key press, the “Timer” funcon starts. The me on the LED display
counts down, and the ashing green indicator on the “Timer” key changes to solid green.