Instant Pot PRO CRISP User Manual

52 | support@instantpot.com | 1-800-828-7280
Care, cleaning and storage
Float valve and silicone cap
Remove the oat valve from the lid
Place one nger on the at top of oat
valve, then turn the lid over. Detach the
silicone cap from the bottom side of the
oat valve, and remove the oat valve from
the top of the lid.
Do not discard the oat valve or
silicone cap!
Top
Bottom
Install the oat valve
Drop the narrow end of the oat valve into
the oat valve hole on the top of the lid.
Place one nger on the at top of the oat
valve, then turn the lid over. Firmly attach
the silicone cap to the bottom of the oat
valve.
Condensation collector
The condensation collector sits at the back
of the multicooker base and catches any
overow from the condensation rim.
Remove the condensation collector
Pull the condensation collector away from
the multicooker base; do not pull down.
Note the tabs on the multicooker base
and the grooves on the condensation
collector.
Install the condensation collector
Align the grooves on the condensation
collector over the tabs on the back
of the multicooker base and slide the
condensation collector into place like
closing a drawer.

Instant Pot PRO CRISP Specifications

General

Model	Pro Crisp
Category	Electric Pressure Cooker
Capacity	8 Quarts
Power	1500 Watts
Material	Stainless Steel (inner pot)
Number of Programs	11
Voltage	120V
Functions	Pressure Cook, Slow Cook, Air Fry, Sauté, Steam, Sous Vide, Roast, Bake, Broil, Dehydrate, Keep Warm
Safety Features	Overheat Protection
Pressure Levels	2 (High and Low)