instantbrands.co.uk | 15
Pairing with the Instant Brands Connect App
You can control your Pro Plus with the Instant Brands Connect App
using your mobile device.
To download the App, either:
• Scan the QR code, or;
• Search “Instant Brands Connect” in the Apple Store or
the Google Play Store.
To get started, you'll need to create an account.
Requirements for pairing
You can use these compatible mobile devices to pair via WiFi and bluetooth:
• Android version 5.0 or later.
• iOS version 12.0 or later.
The Instant Pot can only connect to a 2.4GHz WiFi network. Bluetooth must be
turned on to pair the Instant Pot.
Follow the steps below to start the pairing process.
Before you start, make sure you:
• Download the Instant Brands Connect App and create an account if you don't
already have one.
• Know your home WiFi network name and password.
• Make sure your Bluetooth setting is set to On.
• Make sure your Pro Plus is plugged in and not currently cooking. It should
display OFF.
• Make sure you have your mobile device near the Pro Plus.
01 Open the App and select the Appliances section, then select Add an Appliance.
02 From the list of appliances, select "Instant Pot Pro Plus".
03 Follow the instructions in the App to start the pairing process.
When you're done, you're set to control your Pro Plus from your App, and take
advantage of even smarter, easier cooking!
Note: The Initial Water Test run can be done using the mobile app. Ensure the
device is connected using the steps above before starting the test.
To Next Page
Loading...
Need help?
General
