5
Get Started
Initial set up
Unpack
1. Remove your new Vortex Plus from the box.
2. Remove all the packaging material from in and around
the oven.
3. Make sure to remove all the accessories from inside the
oven chamber.
4. Don’t remove the safety warning stickers or the rating label from
the air fryer.
Clean before use
1. Wipe the interior with a damp cloth. Use a clean, soft cloth
to dry.
2. Wash the accessories with hot water and dish soap. Rinse
with warm, clear water and use a soft cloth to dry.
Placement
1. Place your Vortex Plus on a stable, level surface, away from
combustible material and external heat sources. Do not place your
Vortex Plus on top of another appliance.
2. Make sure to leave at least 5 in / 13 cm of space above and around
all sides of the appliance to allow for sufficient air flow.
Instant-GSG_Vortex_10QT_PLUS_manual_R7.indd 5Instant-GSG_Vortex_10QT_PLUS_manual_R7.indd 5 2021-06-25 3:41:25 PM2021-06-25 3:41:25 PM
To Next Page
Loading...
Need help?
General
