13
Test Run
Follow these steps to ensure your oven is operating properly.
1. Open the oven door.
Place the drip pan on the bottom of the cooking chamber.
Close door.
2. Plug the power cord into a 120V power source.
Display reads “OFF” indicating that oven is in Standby mode.
3. Touch the Air Fry Smart Program control on the Control Panel.
vvvThe default Air Fry Smart Program cooking temperature is 400ºF.
4. Touch the [+] or [−] Time controls to adjust the cooking time to 20
minutes.
Note: Smart Programs automatically save your last temperature and time settings.
5. Touch Start to begin cooking.
The display reads “On” while the oven is in Preheat mode.
Use the Temp [+] or [−] and Time [+] or [−] controls to adjust the cooking
temperature or time.
6. When the oven reaches the Smart Program cooking temperature, the
display reads “Add Food”.
For this test run, do not add food to the cooking chamber.
7. Open oven door.
Use Instant Pot® mini-mitts or oven mitts and carefully insert both cooking
trays into the heated cooking chamber.
Close door.
The cooking time and temperature will be displayed
8. Part way through the Smart Program cooking time, the oven beeps and
displays “turn Food” to remind you to turn your food.
Open the door to automatically pause the Smart Program, then close the
door to resume.
Note: The “turn Food” reminder only appears when using Air Fry or Roast Smart
Programs and only if Rotate is not turned on.
Note: Cooking will recommence after 10 seconds whether food has been turned
or not.
To Next Page
Loading...
Need help?
General
