Need help?Do you have a question about the Instron 34TM-10 and is the answer not in the manual?
Explains the meaning of safety and information labels on the equipment.
Discusses inherent hazards in materials testing systems and external influences.
Explains the Bluehill® software feature for limiting crosshead speed and grip pressure.
Explains the function and use of the large, round, red emergency stop button.
Explains software features to limit crosshead speed and grip pressure during setup.
Procedure to eliminate backlash and deflections in the load string.
Procedures for automatic and manual calibration of force or strain transducers.
Setting physical travel limits to prevent unexpected crosshead movement.
Guidance on identifying and resolving issues related to load cells.
Explains the meaning of safety and information labels on the equipment.
Discusses inherent hazards in materials testing systems and external influences.
Explains the Bluehill® software feature for limiting crosshead speed and grip pressure.
Explains the function and use of the large, round, red emergency stop button.
Explains software features to limit crosshead speed and grip pressure during setup.
Procedure to eliminate backlash and deflections in the load string.
Procedures for automatic and manual calibration of force or strain transducers.
Setting physical travel limits to prevent unexpected crosshead movement.
Guidance on identifying and resolving issues related to load cells.
General| Maximum Force Capacity | 10 kN |
|---|---|
| Number of Columns | 2 |
| Power Requirements | 100-240 VAC, 50/60 Hz |
| Accuracy | ±0.5% of reading |
| Crosshead Speed | 0.001 to 1000 mm/min |
To Next Page
