Need help?Do you have a question about the Instron 4400 Series and is the answer not in the manual?
General| Displacement Resolution | 0.0001 mm |
|---|---|
| Control System | Digital closed-loop control |
| Test Space | Variable, depending on model and accessories |
| Load Accuracy | ±0.5% of reading down to 1/100 of load cell capacity |
| Frame Type | Single column |
| Load Frame Stiffness | Varies by model |
| Control Modes | strain |
| Power Requirements | 220-240 V, 50/60 Hz |
| Weight | Varies by model |
| Dimensions | Varies by model |
| Test Speed | 0.001 to 1000 mm/min |
| Test Speed Range | 0.001 to 1000 mm/min |
Overview of the Front Panel sections: Main, Display, Limits, and Crosshead controls.
Details on system components, options, power, performance, environmental requirements, materials, and dimensions.
Guides for mounting the console, connecting cables, and handling optional equipment.
Details on Main Panel, Display Panel, and Limits Panel controls and functions.
Information on the Resident Test Program, self-test, and checking firmware version.
Covers operating considerations, pretest procedures, and initial power-up steps.
Details on self-test routines upon power-up and system reset procedures.
Guides for calibrating self-identifying and non-self-identifying load cells, including error handling.
Guides for calibrating strain gauge extensometers, including electrical and manual methods.
Explains how to use the display panel for tracking, peak, and break values.
Instructions for establishing gauge length and setting electronic limits for safety.
Details on setting crosshead limits, speed, jog control, and testing area configuration.
Procedure for starting and running a test on the system.
How to display and interpret error messages using the Diagnostic Monitor.
Table listing fault indicators, their probable causes, and corrective actions.
To Next Page
