level, both grips open. Both grips can be opened at any
time by pressing the OPEN foot pedal. Once both grips
are open, a new sequence can begin.
To enable or disable the Pretension function, do the fol-
lowing:
(a) Press [S1] [7] [1]. Read the current state of Preten-
sion from the Main Panel Display.
(b) The Main Panel Display will show:
“S7 1" if Pretension is enabled.
”S7–1" if Pretension is disabled.
(c) Use the [+/–] key to toggle between the enabled and
disabled state.
To enable or disable the Excess Tension function, do the
following:
(a) Press [S1] [7] [2]. Read the current state of Excess
Tension from the Main Panel Display.
(b) the Main Panel Display will show:
“S7 2" if Excess Tension is enabled.
”S7–2" if Excess Tension is disabled.
(c) Use the [+/–] key to toggle between the enabled and
disabled state.
Automatic Start Operation
When the Grip Control function and Automatic Start are
enabled, the crosshead will start automatically in the di-
rection of increasing load as soon as both grips are
closed (by whatever means).
Air Kit Option M10-94400-1
6-48
To Next Page
Loading...
Need help?
General
