Instron 4400 Series User Manual

from Instron. The recorder can be operated in either Eng-
lish or metric units, switch-selectable on the rear panel
of the recorder.
Specifications
The following are the operating specifications for the
Strip Chart Recorder:
Measurement Ranges: 1, 2, 5, 10, 20, 50, 100, 200, 500
mv
1, 2, 5, 10, 20, 50 V
Chart Width: 250mm
Roll Paper: approx. 16m or 25m
Writing System: Fiber-tip pens
Input circuitry: Asymmetric
Range Expansion: 40% (gain control)
Counter Voltage: Manually: =100/-100%, contin.
Accuracy: ±0.35% (≥ 10 µv)
Linearity of Potentio- ±0.25%
meter:
Reproducibility: ±0.25%
Full Scale Deflection ≤0.35 sec.
Time:
Maximum Writing 1m/sec
Speed:
Reference Voltage: Electronically stabilized
Input Impedance
DC Volts, mv Ranges:30 MΩ
Strip Chart Recorder M10-94400-1
6-4

Instron 4400 Series Specifications

General

Brand	Instron
Model	4400 Series
Category	Test Equipment
Language	English