Instron 4400 Series User Manual

System Reset At Initial Power Up
When you initially power up your Series 4400 system,
we recommended that you enter a System Reset se-
quence at the end of the Self Test Routine. This ensures
that system data storage is at the default state (Table 4-5).
To enter a System Reset:
Press S1 on the Main Panel,
then press “0" and ”ENTER" on the keypad.
The Main Panel Display shows “LOSS” after this se-
quence, which indicates that any previously stored condi-
tions and data are lost.
System
Operation
System Reset At Initial Power Up
5-7

Instron 4400 Series Specifications

General

Brand	Instron
Model	4400 Series
Category	Test Equipment
Language	English