Specifications
The following is a complete set of specifications for the
X-Y Recorder:
Calibrated Ranges: 0.5, 1, 2, 5, 10, 20 mv/cm
0.05, 0.1, 0.2, 0.5, 1, 2 V/cm
Variable Range Ex- up to 250% (sensitivity increase)
pansion:
Zero Line Shift: Over entire writing width ±100%
Input Impedance: 2 MΩ
Max. Source Im- 5 kΩ
pedance:
Measuring Error: ±0.25%
Temperature Drift of
Zero Line: approx. 0.5µv/K, mv ranges
approx. 50 µv/K, V ranges
Max. Input Voltage: ±50 V
Max. Voltage between
Inputs and Ground: ±50 V
Overload capacity ±50 V
of Inputs:
50 Hz Suppression: 31 dB
60 Hz Suppression: 36 dB
Common-mode 130 dB @ 1 kΩ
Rejection CMRR:
Paper Size: DIN A4
Usable Writing Area: 210 x 290mm
Pen Type: HP Pens
System Options
X-Y Recorder
6-13
To Next Page
Loading...
