Introduction
The options described in this chapter are either external
accessories that can be added to the system (Recorders,
Printer) or are built into the system (Energy option, Pre-
set Points option, Air Kit option, Pip Control option,
etc.). Those that are built into the system are considered
options because they are not necessary for routine opera-
tion of the system, but can enhance the functionality of
the system in special testing situations.
External accessories can be added to the system at any
time. Installation is merely a matter of cabling the acces-
sory to the system, and connectors are provided on the
back of the console for these devices. All of these exter-
nal devices have their own instruction manuals, which
are supplied with them.
Built-in options are activated from the console front
panel. In the sections of this chapter that follow, these
features are described, and operating instructions are
given.
Introduction M10-94400-1
6-2
To Next Page
Loading...
Need help?
General
