Instron 4400 Series - System Specifications Summary

Specifications
Components
Standard:
Main Panel
Display Panel
Limits Panel
Load Sensor Conditioner
RS-232 Interface
Options:
Strain Sensor Conditioner
IEEE-488 Interface
Strip Chart Recorder
X-Y Recorder
Printer
Power Requirements
+5 Vd.c.
+15 Vd.c.
-15 Vd.c.
(All voltages supplied from Load Frame, must be free of
spikes, surges, or sags exceeding 10% of the average
voltage)
Operating Performance
Load Weighing Accuracy
±0.01% of full scale or ±0.5% of reading (whichever is
greater) ±1 count on the load display.
Load weighing system meets or surpasses the following
standards: ASTM E4, BS1610, DIN 51221, ISO 7500/1,
EN10002-2, AFNOR AO3-501
Specifications
Specifications
2-3