Need help?Do you have a question about the Instron 34TM-5 and is the answer not in the manual?
Details various hazards like crush, debris, electrical, temperature, and explosion risks.
Discusses inherent risks in using the testing equipment and influencing factors.
Addresses crush hazard to fingers or hands from rapid crosshead movement.
Step-by-step instructions for installing various load cell models.
Procedure to eliminate backlash and deflections in the load string for accurate results.
Instructions for calibrating force or strain transducers automatically or manually.
Importance and function of setting crosshead travel limits for safety.
Detailed explanation of the Emergency Stop button's function and reset procedure.
Guidance for resolving common issues like transducer limit trips and overtravel.
Information on diagnosing and resolving issues related to load cells.
Details various hazards like crush, debris, electrical, temperature, and explosion risks.
Discusses inherent risks in using the testing equipment and influencing factors.
Addresses crush hazard to fingers or hands from rapid crosshead movement.
Step-by-step instructions for installing various load cell models.
Procedure to eliminate backlash and deflections in the load string for accurate results.
Instructions for calibrating force or strain transducers automatically or manually.
Importance and function of setting crosshead travel limits for safety.
Detailed explanation of the Emergency Stop button's function and reset procedure.
Guidance for resolving common issues like transducer limit trips and overtravel.
Information on diagnosing and resolving issues related to load cells.
General| Maximum Force Capacity | 5 kN |
|---|---|
| Frame Type | Single column |
| Number of Columns | 1 |
| Control | Bluehill Universal Software |
| Force Accuracy | ±0.5% of reading down to 1/1000 of load cell capacity |
| Power Requirements | 100-240 V, 50/60 Hz |
| Weight | 95 kg |
To Next Page
