What to do if strain instrument is not working on Instron Test Equipment?
If the strain instrument is not working properly on your Instron Test Equipment, check the instrument for proper operation. Also, check that the zero pin was removed from the instrument.
What to do if communication is lost with the user control panel of Instron Test Equipment?
Check the user control panel cable for damage.
General| Control Software | Bluehill Universal |
|---|---|
| Test Space | Various test space options available (depending on model) |
| Crosshead Speed | 0.001 to 1000 mm/min |
| Load Accuracy | ±0.5% of reading down to 1/100 of load cell capacity |
| Applications | Tensile, compression, flexure |
| Load Frame Stiffness | High stiffness for accurate measurements |
| Control Modes | strain |
| Weight | Varies depending on model |
| Dimensions | Varies depending on model |
To Next Page
