Instruction Manual CVM201 Super Bee
InstruTech, Inc. Page 20
7.2 Non-Linear Analog Output - mbar
Non-Linear analog output for selected gases - Engineering units in mbar
Values listed under each gas type are in volts.
Note: By design, these values are identical to the outputs from Brooks Automation, Inc. / Granville-Phillips®
Convectron® gauges, Mini-Convectron® modules and controllers so that equivalent units can be interchanged
without affecting your process system or software.
An analog output of less than 0.01 volts to near 0 volt indicates a damaged or faulty sensor.