17
2. Connect the HDMI AV Component
This is an example of connection with an AV component
that has an HDMI jack. With connection to an AV
component that conforms with the CEC (Consumer
Electronics Control) standard, you can use features such as
the HDMI CEC feature (*) that links with the input selector,
and the HDMI Standby Through feature which allows you to
play video and audio from AV components on the TV even
when this unit is in standby mode.
0 To play 4K or 1080p video, use a high speed HDMI
cable. Further, to enjoy HDCP2.2 compatible video,
connect to the HDMI IN1 to IN5 jacks.
(*) The HDMI CEC feature: You can control features such as linking
input switching with the input selector and players conforming to
the CEC standard, switching audio to output it from the TV or
from this unit, and adjusting the volume using the remote
controller of a CEC-compliant TV, and automatically switching
this unit to standby when the TV is turned off.
> Before Start > Part Names >Install > Initial Setup > Playback > Advanced Manual
Troubleshooting | Supplementary Information, etc.
GAME
BD/DVD
a
Streaming media
player
Cable/Satellite
set-top box
Setup
0 When "Yes" is selected for "5. Audio Return
Channel" in Initial Setup (P26), the HDMI CEC
function and HDMI Standby Through function are
automatically enabled. If "No, Skip" is selected,
settings are required in the Setup menu after
Initial Setup is complete. Press on the remote
controller and make the settings in "6. Hardware" -
"HDMI".
0 To enjoy digital surround sound including Dolby
Digital, audio output should be set to Bitstream
output on the connected Blu-ray Disc player or
other device.
To Next Page
Loading...
Need help?
General
