Need help?Do you have a question about the Integra DRX-2.3 and is the answer not in the manual?
General| Channels | 7.2 |
|---|---|
| HDMI Inputs | 6 |
| HDCP Version | 2.2 |
| Audio Formats Supported | Dolby Atmos, DTS:X, Dolby TrueHD, DTS-HD Master Audio |
| Network Connectivity | Ethernet, Wi-Fi |
| 4K Ultra HD Pass-through | Yes |
| HDR Support | HDR10, Dolby Vision, HLG |
| Bluetooth | Yes |
| Phono Input | Yes |
| Zone Audio | Zone 2 |
| Power Output | 80 W/Ch (8 Ohms, 20 Hz–20 kHz, 0.08% THD, 2 Channels Driven) |
| HDMI Outputs | 2 |
| Streaming Services | Spotify, Tidal, Deezer, Pandora, TuneIn |
| Frequency Response | 10 Hz–100 kHz |
| THD | 0.08% |
| Input Sensitivity | 200 mV/47 k-ohms (Line) |
| Signal-to-Noise Ratio | 106 dB (Line, IHF-A) |
| USB Port | 1 |
Guide to selecting and connecting speakers for optimal audio setup.
Instructions for connecting the AV receiver to a TV, including ARC functionality.
How to connect various audio/video sources like Blu-ray players or game consoles.
Steps for connecting the unit to a network for internet services.
Guide to wirelessly playing audio from Bluetooth-enabled devices.
How to select and change listening modes for different audio experiences.
Overview of configurable advanced settings and their page references.
How to navigate and make settings using the on-screen display and remote.
Settings for TV output, OSD, and input assignments for HDMI, video, and audio.
Configuration of speaker channels, subwoofer, height speakers, and impedance.
Adjustments for multiplex/mono audio, Dolby, DTS signals, and LFE level.
Settings for IntelliVolume, input name editing, and audio/video source priority.
Settings for HDMI functions, network, Bluetooth, and power management.
Procedures to address erratic unit behavior, including restarting.
Steps to restore all unit settings to factory defaults to resolve issues.
Troubleshooting steps for power-related issues like "AMP Diag Mode".
To Next Page
