43
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
Network Connection
This unit can be connected to the network using a wired LAN or Wi-Fi (wireless
LAN). You can enjoy network functions such as Internet radio by network
connection. If connection is made by the wired LAN, connect the router and the
ETHERNET jack with the LAN cable as shown in the illustration. To connect by
Wi-Fi, select "Wireless" for "4. Network Connection" in Initial Setup ( p133),
select your desired setting method, and then follow the on-screen instructions.
To congure the setting on the Setup menu after the completion of Initial Setup,
press the button on the remote controller, and select "6. Hardware" - "Network"
to make the setting. ( p117) For the Wi-Fi connection, stand the wireless
antenna for use.
a LAN cable
a
To Next Page
Loading...
Need help?
General
