27
Playback
AV Component Playback
Basic Operations
You can play the audio from AV
components such as Blu-ray Disc players
through this unit.
0 When a TV is connected to the HDMI
OUT SUB jack, press Q (P6) on the
remote controller and use "Other" -
"HDMI Out" to switch between MAIN and
SUB.
Perform the following procedure when the
unit is on.
1. Switch the input on the TV to that
assigned to the unit.
2. Press the input selector button (a) on the
remote controller with the same name as
the jack to which you connected the
player to switch the input.
For example, press BD/DVD to play the
player connected to the BD/DVD jack.
Press TV to listen the TV's sound. To
play a device connected to the AUX
Input HDMI jack on the front panel,
press AUX.
0 When the CEC link function works,
the input switches automatically when
you have connected a CEC compliant
TV and player to this unit using HDMI
connection.
3. Start play on the AV component.
> Before Start > Part Names > Install > Initial Setup > Playback > Advanced Manual
Troubleshooting | Supplementary Information, etc.
1
3
2
TV
INPUT
To Next Page
Loading...
Need help?
General
