EasyManua.ls Logo

Integra DTR-70.6 - Specifications

Integra DTR-70.6
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
Specifications
Amplifier Section
Rated Output Power
All channels: 135 watts minimum continuous power per channel,
|QJONQCFUEJCPPGNU|FTKXGPHTQO*\VQM*\YKVJC
maximum total harmonic distortion of 0.08% (FTC)
(North American)
11 ch × 185 W at 6 ohms, 1 kHz, 1 ch driven of 1% (IEC) (Others)
Maximum Effective Output Power
11 ch x 230 W at 6 ohms, 1 kHz, 1 ch driven (JEITA) (Australian and
Asian)
Dynamic Power (
¼
)
¼
IEC60268-Short-term maximum output power
9ŝ(TQPV
9ŝ(TQPV
9ŝ(TQPV
THD+N (Total Harmonic Distortion+Noise)
0.08% (20 Hz - 20 kHz, half power)
Damping Factor
(TQPVM*\ŝ
Input Sensitivity and Impedance (Unbalance)
O8Mŝ.+0'
O8Mŝ2*101//
Rated RCA Output Level and Impedance
O8ŝ24'176
Maximum RCA Output Level and Impedance
8ŝ24'176
Rated XLR Output Level and Impedance
O8ŝ24'176
Maximum XLR Output Level and Impedance
8ŝ24'176
Phono Overload
70 mV (MM 1 kHz 0.5% Direct)
Frequency Response
5 Hz - 100 kHz/+1 dB, –3 dB (Direct mode)
Tone Control Characteristics
±10 dB, 50 Hz (BASS)
±10 dB, 20 kHz (TREBLE)
Signal to Noise Ratio
110 dB (LINE, IHF-A)
80 dB (PHONO MM, IHF-A)
Speaker Impedance
ŝŝQTŝŝ
Video Section
Input Sensitivity/Output Level and Impedance
8RRŝ%QORQPGPV;
8RRŝ%QORQPGPV2
B
/C
B
, P
R
/C
R
)
8RRŝ%QORQUKVG
Component Video Frequency Response
5 Hz - 100 MHz/+0 dB, –3 dB
Tuner Section
FM Tuning Frequency Range
87.5 MHz - 107.9 MHz (North American)
87.5 MHz - 108.0 MHz, RDS (Others)
AM Tuning Frequency Range
522/530 kHz - 1611/1710 kHz
Preset Channel
40
Network Section
Ethernet LAN
10BASE-T/100BASE-TX
General
Power Supply
AC 120 V, 60 Hz (North American)
AC 220 - 240 V, 50/60 Hz (Others)
Power Consumption
10.7 A (North American)
1105 W (Others)
0.1 W (Stand-by, North American)
0.13 W (Stand-by, Others)
145 W (No-sound, North American)
155 W (No-sound, Others)
Dimensions (W × H × D)
435 mm × 199 mm × 455.5 mm
17-1/8" × 7-13/16" × 17-15/16"
Weight
21.5 kg (47.4 lbs.)
r*&/+
Input
IN1 (BD/DVD), IN2 (CBL/SAT), IN3 (STB/DVR, HDCP2.2), IN4 (GAME),
IN5 (PC), IN6, IN7, AUX INPUT (HDMI/MHL) (front)
Output
OUT MAIN (ARC, HDCP2.2), OUT SUB, OUT ZONE2
Video Resolution
Pass through: 4K 60 Hz (YCbCr 4:2:0)
Upscaling: 4K 30 Hz
Audio Format
Dolby Atmos, DTS-HD Master Audio, DTS-HD High Resolution Audio,
Dolby TrueHD, Dolby Digital Plus, DSD, Multichannel PCM
Supported
3D, Audio Return Channel, DeepColor, x.v.Color, LipSync, CEC (RIHD),
4K (Upscaling and Passthrough)
r*&$CUG6
OUT ETHERNET (CAT 5e/6)/IN (HDMI)
r8KFGQ+PRWVU
Component
IN1 (BD/DVD), IN2 (CBL/SAT)
Composite
IN1 (CBL/SAT), IN2 (STB/DVR), IN3 (GAME), AUX INPUT (front)
Analog RGB inputs
PC IN
r8KFGQ1WVRWVU
Component
MONITOR OUT
Composite
MONITOR OUT, ZONE2 OUT
r#WFKQ+PRWVU
Digital
OPTICAL 1 (GAME), 2 (TV/CD), AUX INPUT DIGITAL (front)
COAXIAL 1 (BD/DVD), 2 (CBL/SAT), 3 (STB/DVR)
Analog
BD/DVD, CBL/SAT, STB/DVR, GAME, PC, TV/CD, PHONO, AUX INPUT
(front)
r#WFKQ1WVRWVU
Analog
PRE/LINE OUT ZONE2, ZONE3
Balance Pre Outputs
PREOUT FRONT L, FRONT R
Analog Multichannel Pre Outputs
FRONT L/R, CENTER, SURROUND L/R, BACK L/R, HEIGHT 1 L/R,
HEIGHT 2 or WIDE L/R, SW1 x 2, SW2 x 2
Speaker Outputs
FRONT L/R, CENTER, SURR L/R, BACK L/R, HEIGHT 1 (or ZONE3
or Bi-AMP or SUBWOOFER1) L, HEIGHT 1 (or ZONE3 or Bi-AMP or
SUBWOOFER2) R, HEIGHT 2/WIDE (or ZONE2) L/R
Phones
PHONES (Front, ø 6.3)
r1VJGTU
Setup Mic 1 (Front)
RS232 1
Ethernet 1
IR IN 2 (A/B) / IR OUT 1
12V TRIGGER OUT 3 (A/B/C)
USB 1 (Front)
RI 1
Specifications and features are subject to change without notice.

Related product manuals